| English   Contact Us  Add to Favorites 4006 833 802
Sourcing Center
4006 833 802
Sourcing Center Your location > Home > Sourcing Center
80 g white glassine paper
Release Time2014-9-3 13:58:25     Reading38746 times
Name Unit Standard Test method
Thickness um 743 GB/T451.3
Basis weight g/O 802 GB/T451.2
Width mm Ordered width + 2 By dividing a direct measurement of the tape measure value of 1 mm
Length m
Tensile strength Transverse N/2.5cm 80 GB/T453 
Longitudinal N/2.5cm 180
Elongation at break Transverse % 12 GB/T453 
Longitudinal % 10
Heat shrinkage rate Transverse % 1   120  5min
Longitudinal % 0.5
Tear Transverse MN 2800 GB/T455-2002
Longitudinal MN 3200
Haze % 82 GB/T2410
Transmittance % 30
Moisture % 51
Paper core mm 762

1, drum face should level off, clean, can not have split;
2, paper should level off, there can be no wrinkles, folds, deformity, hole, various spots, sand, hard block and other effects using paper disease;
3, the colour and lustre of paper should be consistent;
4, Each volume joints shall not be more than one, and have joint volume is not greater than the whole order volume by 20%, joint marking should be colored paper.
Environmental requirements, in line with the ROHS directive, phthalates, EN71-3 standard.
Packing: inside to use thin film bag packing, paper packaging, moisture-proof, waterproof.
Other indicators according to gb/line mark, or the enterprise standard approved by the company. Base paper appearance, colour and lustre according to provide the pattern on both sides shall prevail.

 ContactsPurchase department Mobile telephone
 Tel0760-23372273 E_mail
PrevNo Next62 g white glassine paper
Copyright © 2003-2023 Lecco (Zhongshan) Adhesive Products Co., Ltd. All Rights Reserved.
AddressRm. 2103 Seaport Centre, 1 Shengping East Road, Xiaolan Town, Zhongshan City, Guangdong Province, China.