| English   Contact Us  Add to Favorites 4006 833 802
4006 833 802
PP Your location > Home > Products > Prime Films > PP
Technical Parameters
Matt white PP Synthetic PG75/WG80/WP63
Material Matt white PP Synthetic PG
Basis Weight 583 g/m2
Thickness 733
Color White
Transverse tensile strength 180 N/2.5CM
The longitudinal tensile strength 90 N/2.5CM
Material Supercalendered Glassine
Basis Weight 783 g/m2
Thickness 655
Color White
Transverse tensile strength 80 N/2.5CM
The longitudinal tensile strength 150 N/2.5CM
Glue Type Aqueous adhesive
Coating Weight 212 g/m2
Thickness 192
Physical Data
Peel adhesion/180 7.0 N/2.5CM
Initial tack 7.0 N/6.25cm2
Release force 0.020.10 N/2.5CM
Holding Power 4 h/2.5CM
Service Temp -10 60
Min. application temp. 10
Max. application temp. 40
Product Width
1070mm (Other specifications can be sliced.)
Product length
400m800m1000m2000m (Other specifications can be sliced.)
Product Data0975-7863
Last Modified4/4/2018
Widely used in law protection, skin care, oral hygiene, sun protection, bath and shower, aromatherapy and perfume, as well as cosmetics, etc.; advertising photo, inkjet and other fields.
The surface treatment of domestic PP pearlescent synthetic paper has good printing performance, good ink absorption, water resistance, heat resistance and weather resistance.
Shelf life & storage
Normal temperature a cool, ventilated, avoid sunlight, temperature 253 , relative humidity in the 505%, with good sealing and moistureproof ability of packaging, storage life can be up to 12 months.
Acrylic water-based pressure-sensitive adhesive, suitable for pasting materials: various types of paper, film, steel, glass, adhesive products.If the customer needs to paste it on PP and PE, it should be tried in the corresponding environment first.Does not apply to paste below -5 environment.
The information given is based on our knowledge and experience; and is given in good faith. It does not represent a guarantee or legal warranty for specific properties of for suitability for a specific use. The products are used in conditions beyond our control; we cannot assume any liability for damage caused through their use. It is highly recommended to take certain test prior to use of this product(s), to ensure it meets the requirement and/or suitability for use under end-use conditions. We reserve the right for the technical innovation of the product(s).
Copyright © 2003-2014 Lecco (Zhongshan) Adhesive Products Co., Ltd. All Rights Reserved.
AddressRm. 2103 Seaport Centre, 1 Shengping East Road, Xiaolan Town, Zhongshan City, Guangdong Province, China.